Photo of David Winter

david winter

Ubuntu Dapper Web Server How-to

It’s finally here, my updated how-to on how to get Ubuntu Dapper up and running as a home web server. Perfect for hosting those small web sites and blogs. My original Ubuntu 5.10 web server how-to is still available.

This updated version is very similar to the 5.10 how-to, however, there are a few changes required. The following changes have been made:

  • Setting up the Multiverse and Universe repositories
  • The packages to install Ruby
  • Setting a symbolic link for Ruby
  • Updating rubygems
  • Clearing the rubygems cache

Other than those, the rest of the how-to is the same as the Breezy how-to.

This how-to assumes that you have a clean install of Ubuntu Dapper (I’m not currently using Ubuntu Dapper Server, just the basic desktop install).

The first thing to do, is get ssh installed so that if you like, you can connect and do all of this remotely.

sudo apt-get install ssh

There are some packages that are needed that aren’t in the default repositories for apt, so you have to enable them manually. Universe and Multiverse are needed.

To enable them, open up the Synaptic Package Manager

  1. Settings
  2. Repositories
  3. Add
  4. Ensure that ‘Ubuntu 6.06 LTS’ is the selected ‘Channel’
  5. Check ‘Community maintained (Universe)’
  6. Check ‘Non-free (Multiverse)
  7. Click OK and let it rescan the servers.

You can then close Synaptic. apt is now all set up ready for installing the packages we need.

Before we start installing the packages we want, do a system update:

sudo apt-get update


All on one line:

sudo apt-get install irb libdbm-ruby libfcgi-ruby1.8 libgdbm-ruby libmysql-ruby libopenssl-ruby libruby1.8-dbg ri ruby1.8-dev

In order for Ruby to work ok, do the following:

sudo ln -s /usr/bin/ruby1.8 /usr/bin/ruby

This will add a symbolic link into your /usr/bin directory so that the command ruby works, as opposed to ruby1.8.

MySQL Server

sudo apt-get install mysql-server

During this install, a Postfix config screen will appear. Select OK and then “No configuration”.

Ruby Gems & Rails

This is the standard way of installing ruby applications.

Need to download it directly from its web site:


Then extract it:

tar xvfz rubygems-0.8.11.tgz

Move into the extracted directory:

cd rubygems-0.8.11

Run the setu-p program:

sudo ruby1.8 setup.rb

Update all installed gems on the system:

sudo gem update --system

Take note that there are two dashes preceding system.

Now that Ruby Gems is installed, we can install Rails. However, I encountered problems with this and had to clear my rubygems cache first. Do the following:

gem env gemdir

This will output a path location which you’ll need to use for the next command. For me, it was and probably is the same for you, /usr/lib/ruby/gems/1.8

sudo rm ABOVE_PATH/source_cache

This will clear your rubygems cache. Now you shouldn’t have any problems with installing rails.

sudo gem install rails -y

Apache 2

Next is the web server I’m using. Apache 2. The following command will install Apache 2, FastCGI, FCGI, PHP 5 with MySQL functionality. PHP isn’t needed for Ruby or Rails, but I’m including it so that I can run PHP apps…

sudo apt-get install apache2 libapache2-mod-fcgid libapache2-mod-fastcgi libapache2-mod-php5 php5-mysql

Once that’s done, we’ll need to enable the Apache mods we’ll be using:

sudo a2enmod fcgid
sudo a2enmod fastcgi
sudo a2enmod rewrite

You’ll notice I’ve installed two different types of Fast CGI. That’s because at some point I want to try them both out. However, at the moment, I’ve only had success with getting FastCGI working decently.

Restart Apache to make sure all is well.

sudo /etc/init.d/apache2 restart


I thought FastCGI would have been installed after doing the libapache2-mod-fastcgi - but for some reason, you have to install it manually.

In order to configure and build from the source files, you need to download some basic files:

sudo apt-get install build-essential

Then, grab the FastCGI files from the web site:



tar xvfz fcgi-2.4.0.tar.gz

Move into the directory:

cd fcgi-2.4.0

Configure the installer:



sudo make install

Now, that is all of the Apache and FastCGI files installed. Later, we’ll need to configure it all.


Webmin is ugly, but it works, and it lets us configure Apache and the Nameserver easily.

Go to and download the latest version of webmin in tar.gz format.

Once downloaded, extract it (filename may vary depending on the version you download):

tar xvfz webmin-1.260.tar.gz

Move into the directory:

cd webmin-1.260

Run the set-up program:

sudo ./ /usr/local/webmin

You can use the default settings for this, or change them if you know what you’re doing. Be sure to set a password you can remember.

At the end of the set-up you’ll be given an address to use to connect to webmin. Remember this! and go to it straight away and login.

Do the following to configure Webmin to work with Apache:

  1. At the top, click on the “Servers” link.
  2. Select Apache Webserver.
  3. Select Module Config.
  4. Set the following values:
    • Apache Server Root - /etc/apache2
    • Path to httpd executable - /usr/sbin/apache2
    • Path to httpd.conf - /etc/apache2/httpd.conf
    • Command to start Apache - /etc/init.d/apache2 start
    • Command to stop Apache - /etc/init.d/apache2 stop

Save these settings.


I’m no DNS expert, so this is very vague and I suggest you go read a howto on DNS… here’s one I used to complete this part.

This will be different depending on your set-ups. For me, I have my domain name pointing to my web server in America that hosts

On the server, there, I have the DNS pointing to my Internet IP at home, here in the UK.

The nameserver I’m using is Bind.

sudo apt-get install bind9

Once that’s installed, we need to configure it in Webmin.

  1. Click the “Servers” link.
  2. Select BIND DNS Server.
  3. A message will appear about a configuration file. Select the 3rd option “Setup as an internet name server, but use Webmin’s older root server information”
  4. Create a Master Zone and enter the following details:
  5. Click on “Create”.
  6. Click on the “Address” link.
  7. Create a new Address record using the following:
    • Name - (including the trailing dot)
    • Address - your Internet IP address
  8. Click on “Create”.
  9. Go to the Module Index.
  10. Click on “Apply Changes”.

Set-up your web site

You’ll need somewhere to store your web site files, so I suggest to first of all create a public_html directory in your user directory.

mkdir ~/public_html

Now we’ll create a test HTML file to check all is working so far.

nano ~/public_html/index.html

Inside it put the following:

<p>Hopefully you can see this...</p>

Save the file using Control O and then Control X to quit Nano.

Now, set the permissions of the file so it’s visible to the world:

chmod 644 ~/public_html/index.html

In Webmin, go to the Apache configuration.

Create a new Virtual Server with the following:

  • Document Root - home/yourusername/public_html
  • Server Name -

Save the settings. Now restart Apache:

sudo /etc/init.d/apache2 restart

Now visit and you should see:

Hopefully you can see this…

If so, excellent! If not, hmmm… maybe you didn’t follow everything? or I made a mistake somewhere… leave a comment below.

Take a 5 minute break!

Refreshed? Right. Moving on…

phpMyAdmin for MySQL management

Go to and download the latest stable release of phpMyAdmin in tar.gz format.


tar xvfz phpMyAdmin-2.7.0-pl2.tar.gz

Move the directory to some place helpful:

mv phpMyAdmin-2.7.0-pl2 ~/phpmyadmin

Move into that directory:

cd ~/phpmyadmin/

Create a new configuration file:

cp config.default.php

Change the authentication mode to http


Change this line:

$cfg['Servers'][$i]['auth_type'] = 'config';

…to this line:

$cfg['Servers'][$i]['auth_type'] = 'http';

Save the file.

Back in the command line, we need to set the root password, because by default, there isn’t one!

mysql -u root

You’ll then enter the MySQL console. Enter the following:

UPDATE mysql.user SET Password=PASSWORD('newpasswordhere') WHERE User='root';

This will set the root password. Now flush the privileges:


Now exit:


Now, we want phpMyAdmin accessible on the server ‘globally’. So that it doesn’t matter what address we’re using, we’ll still be able to access it.

In Webmin, under Apache Webserver:

  1. Select “Default Server”
  2. Aliases and Redirects
  3. Under “Document directory aliases” enter /phpmyadmin/ into the first text box, and /home/davidwinter/phpmyadmin/ into the box to the right of that one.

Save, and in the Terminal restart apache:

sudo /etc/init.d/apache2 restart

Go to

Login in using “root” and the password you set in the MySQL console.

You can do any MySQL configuration here. For me, I restored my Typo database for this blog from a backup.

FastCGI configuration with a Rails application

This part is what gets a Rails app running really fast.

You’ll need to configure the FastCGI config file:

sudo nano /etc/apache2/mods-enabled/fastcgi.conf

Here is my config file:

<IfModule mod_fastcgi.c>
  #FastCgiWrapper /usr/lib/apache2/suexec2
  FastCgiIpcDir /var/lib/apache2/fastcgi
  FastCgiConfig -maxClassProcesses 2 -maxProcesses 2 -minProcesses 2 -processSlack 2
  FastCgiServer /home/davidwinter/typo/public/dispatch.fcgi -idle-timeout 120 -processes 2 -initial-env RAILS_ENV=production

The following line of the above:

FastCgiServer /home/davidwinter/typo/public/dispatch.fcgi -idle-timeout 120 -processes 2 -initial-env RAILS_ENV=production

Is important. You need to specifiy a line like this for each Rails app you’ll be using under FastCGI.

Now, in your Rails application directory check that in public/.htaccess has this line:

AddHandler fastcgi-script .fcgi

And, that in the rewrite rules section, it has this:

RewriteRule ^(.*)$ dispatch.fcgi [QSA,L]

…instead of:

RewriteRule ^(.*)$ dispatch.cgi [QSA,L]

Notice .fcgi instead of .cgi

And that’s about it!

Give Apache one final restart:

sudo /etc/init.d/apache2 restart

And you should now have everything working.

As I said, any problems, leave a comment and I’ll try and help.